Blowing in the wind, the wind wheel rotation by wind thrust, when the speed reaches a certain level, the generator start generating electricity (generation only effective power generation, will begin charging), with the changes in the size of the wind power generation will respond to changes, our wind turbine design standards started about an average of 2.5 m / s, 9M / S to reach the rated power, began to control the motor running about about 13-15M / S, our wind turbine rated power 300W maximum power of 500W.

    Wind wheel works: proportional to the density of the wind wheel power with air. Proportional to the square of the power generated by the wind wheel wind wheel diameter; wind wheel power is proportional to the cube of the wind speed; proportional to the efficiency of the the wind wheel power generated by the wind wheel. The efficiency of the wind turbine wind wheel is generally between 0.35 and 0.45 (theoretical maximum value of 0.593). At present our products in about 0.41.

    The fan rotation wind power generation, generator controller internal rectifier three-phase alternating current into direct current to charge the battery. When the battery is full, the controller will automatically disconnect the generator line, stopping to recharge the battery, as well as the prevent generator coaster (ultra-high-speed or abnormal operation), the controller will give generator and a load, a process called unloading . When battery power when you need to add, the controller will stop unloading restore the state of charge. In addition, when the wind is too large, the controller will generator control in the unloading state, unloading, fans slow or stop turning. According to the different, and some need to configure the AC output function, we can provide a variety of parameters sine wave inverter. With a step-by-step product development, the specifications will be more and more various specifications can also be customized according to customer requirements.