Thank you for your purchase in good faith, as huali user, you will have our following services: Product quality assurance period: Electric use within one year from the factory shipment or not more than two yearsService program: supporting plants to phone or fax the form of detailed information (including the motor number, the factory date, defects and customer address, telephone, etc.) has informed me of the company, such as Foreign customers also need to provide electronic maps of damage to mo

The explosion-proof motor shall not disassemble; disassembly and maintenance, can not use parts of the fulcrum of the explosion-proof surface as the crowbar but not allowed to beat or strike, explosion-proof surface. When disassembling the motor, should take the lee cover, fan, bolts, and then remove the cover plate hand casing and the bearing cap is then made of logs or copper rod along the axial direction of the shaft extension end of the collision, separate cover and a base, finally remove th

The components of the motor shell must be tested after hydrostatic test for one minute. The test results are qualified by discontinuous dripping, and the following points should be paid attention to when doing hydrostatic test:1. for hydrostatic test, the parts must be handled with care, and pay attention to the protection of the explosion-proof surface, prevent knock.2. after water pressure test, parts of the internal water and foreign body clean, to prevent rust, after drying parts, processing

Coal mine power supply system is generally ground substation, 10KV or 6KV power supply through the underground central substation, mining area substation until the power distribution point of the work surface, basically belongs to the vertical mode of four power supply system. The development of electrical equipment in coal mine is developing along with the change of power supply voltage level. Power supply voltage generally adopt 1140V voltage level of 380V and 660V, using comprehensive mechani

The explosion-proof motor shall not disassemble; disassembly and maintenance, can not use parts of the fulcrum of the explosion-proof surface as the crowbar but not allowed to beat or strike, explosion-proof surface. When disassembling the motor, should take the lee cover, fan, bolts, and then remove the cover plate hand casing and the bearing cap is then made of logs or copper rod along the axial direction of the shaft extension end of the collision, separate cover and a base, finally remove th

(1) the generation of rotor induced currentWhen the stator winding of the motor is connected to three-phase alternating current, will produce a rotating magnetic field rotation speed to NS between the stator and the rotor, the rotor is still at the beginning, so the rotor conductor will be rotating magnetic field cutting, according to the principle of relative motion, we can also put the magnetic field as real, and the rotor conductors relative to the magnetic field rotary cutting magnetic lines

In our discussion of the three-phase asynchronous motor, the rotating magnetic field is composed of three-phase sinusoidal AC stator windings pass into the power of each phase windings have the corresponding magnetic field, due to the size and direction of the current is continuously changing with time, so each phase winding direction of the magnetic field is constant change, through the most simple in star connection poles of the stator winding can be seen as an example, the synthesis of magnet

Efficiency is the most important technical and economic index of motor Low voltage asynchronous motor load rate is generally between 50%~80%, mostly in the range of 60%~70%. The efficiency of asynchronous motor variable changes in different load rate and the loss of motor (stator and rotor winding copper loss) and constant loss (iron loss and mechanical loss) of the proportion, in total loss, variable loss increases, constant loss is reduced and the highest efficiency is equal to the low load ra

1, the quota refers to a set of ratings and operating conditions.Quota categories are: the amount of continuous work in accordance with the corresponding S1 workShort term work amount corresponding to the S2 workThe amount of cycle work is determined by S3~S8The amount of non cycle work is corresponding to the S9 operating systemThe amount of work done by discrete constant load corresponds to the S10 operating system。 2, the rated value refers to a variety of numerical characterization motor n