1, Y, Y2, YPT, YB, a series of small motors.

    YZ, YZR Series Crane and Metallurgical motor.

    3, JS, JR, JR2, frame size.

    4, Y, YR YKK, YRKK, frame size 355-800,380 V, 60KV 10KV various types of large and medium-sized high and low motor.

    5, Z2, Z3, Z4, ZZJ, ZZY, ZYZ, and derived series DC motor.

    6, SF, SFW, TF, ZYS generator.

    Y series full of totally enclosed fan-cooled three-phase squirrel cage induction motor. The use is very common.

    YS series three-phase asynchronous motor, less power for small machine tools, pumps, compressors driven junction box in the top of the motor.

    YSF, YT series is not much different, are dedicated fan three-phase asynchronous motor, is based on the matching requirements of the fan industry, the motor structure to take a series of noise reduction, vibration reduction measures. The series motor with high efficiency, low noise, good starting performance, reliable operation, easy installation and so on. Apply to the installation and use of a fan, the fan ideal accessory products.

    YD multi-speed three-phase asynchronous motor, generally 4/2 pole 8/6-pole 8/4/2 pole 6/4 pole 12/6 poles 8/6/4 pole 8/4 pole 6/4/2 pole 12 / 8/6/4 pole

    YL series two-value capacitor single-phase induction motor, that is, two capacitors.

    YC series single-phase capacitor start induction motor.

    YY series single-phase capacitor run induction motor.

    Motor model of Y, YS, YSF, YT, YD, YL, YC What does it mean?

    SG Series is a high degree of protection three-phase asynchronous motor Y series interchangeable, but the performance has strengthened (such as the adjustment and optimization of the electromagnetic program, some of the specifications using cold-rolled silicon steel sheet, etc.), so that the series motor vibration and noise load (especially noise) was significantly lower than the Y series motor. Experiments show that the noise of the motor series I-class standard of motor vibration to a lower priority than the Y series standard. Shaft end bearing oiling device, without dismantling the motor can be oil bearing and simple maintenance.

    YCT series electromagnetic governor motor, is to change the method of magnetizing current size to adjust the torque and rotational speed of the output shaft speed motor. It can be used in constant torque load speed adjustment and tension control occasions, more suitable for the occasion of the blower and pump load. High starting torque, the inertia of the load buffer starting at the same time to prevent overload protective effect. Simple 2500 Series 6

    The series YP2 VVVF three-phase asynchronous motor, the inverter power supply VVVF three-phase asynchronous motor. By changing the frequency of the power smoothly adjust the motor speed to achieve the purpose of energy conservation and control automation. Series YP2 motor, high efficiency, wide speed range, high precision, stable running, easy operation and maintenance, mounting dimensions conform to standards of the International Electrotechnical Commission (IEC), divided into self-fan cooling and an external fan-cooled two.

    CXT series of rare earth permanent magnet three-phase synchronous motor, new rare earth permanent magnet materials and other high quality materials, the structural design of the rotor and the electromagnetic parameters of selected aspects of innovation, the motor has a high efficiency, power factor, while ( power factor reaches 95% or more), which has a high starting performance, high led into the synchronizing torque and high overload capacity, and the motor efficiency curve is relatively flat, low load with high efficiency, it is possible to widely used in petroleum, chemical, metallurgy, mining, textile and other long-term load operation of the equipment.

    A YLZC series of cooling tower motor, motor housing protection class IP45 (or IP55), the series motor - series of noise reduction, vibration, waterproof, moisture-proof measures taken in the structure with low noise, high efficiency, waterproof, moisture and so little.

    YZS series injection molding machine dedicated motor, which in addition to the basic features of the Y series motor, but also has strong overload capacity, low noise, especially the rated load and overload, low noise characteristics.

    YXF series of high-temperature exhaust fan fire dedicated motor, the motor housing and the flue gas is completely isolated, built-in independent cooling path, with the extraordinary ability of the continuous conveyor 300C ° high temperature flue gas 30MIN.